Skip to main content

A 20ft containment store built around a full-length galvanised mesh deck, rated to 7.5 kN/m², hung above a sealed steel bund. Drums and IBCs sit on the mesh, and whatever escapes them drops through it to collect underneath the working surface. Internal length is 5.84 m, and that is usually where operations end up once their drum stock has outgrown a 10ft unit — less because the volume doubles than because there is finally enough run to keep incompatible goods at opposite ends instead of side by side.

Dimensions

  • External: 6.06 × 2.44 × 2.59 m (19 ft 11 in × 8 ft 0 in × 8 ft 6 in)
  • Internal: 5.84 × 2.35 × 2.39 m (19 ft 2 in × 7 ft 9 in × 7 ft 10 in)
  • Door opening: 2.34 × 2.28 m (7 ft 8 in × 7 ft 6 in)
  • Weight empty: 2,820 kg (6,217 lb)
  • Deck rating: 7.5 kN/m² (157 lb/ft²)

Build and fittings

  • Sealed steel bund beneath the working deck
  • Full-length galvanised open mesh deck rated to 7.5 kN/m²
  • Exterior hinged double doors at one end, two locking bars per leaf
  • Converted from a new one-trip container
  • Forklift pockets for repositioning on site
  • Factory-fitted lockbox
  • 24 vents for through-ventilation

Segregation is what the extra length buys

The obvious reason to move up from a 10ft store is capacity. The better reason is layout. Nearly six metres of deck lets you put physical distance between materials that should not share a spill path, keep a decanting position at the door end where the light and the airflow are, and still leave a walkway rather than shuffling drums to reach the back row. Because everything drains to a common sealed bund, that separation is about handling and access rather than isolating the containment itself — worth being clear about when you plan what goes where.

The 24 vents are double the count on the 10ft units, giving continuous passive airflow across the full length rather than airflow that dies in the middle of a long box.

On an open or unmanned site

  • Factory-fitted lockbox and twin locking bars as standard, so the store can be left secured
  • Forklift pockets allow repositioning as a yard layout changes, without a crane
  • Cor-Ten shell taken from one-trip stock — sound panels and unworn door gear, not a patched used box
  • Galvanised deck, so the surface taking the traffic is not the surface that rusts first

Before you specify

Containment volume, ventilation and signage depend on what you store, how much of it, and the rules that apply to your site. We supply to a specification and do not assess or certify your storage arrangement. Tell us the substances and quantities and we will confirm what we can build.

Delivery and cover

Delivery is free everywhere in the UK, Northern Ireland, the Isle of Man, Jersey and Guernsey included, and no VAT is added at checkout — the price shown is what you pay. At 2,820 kg empty this is one of the heavier units in the range, so the pitch needs to be firm as well as level: a bunded store placed on ground that settles unevenly will not hold its volume as intended. Delivery is by tilt-bed with a straight approach behind the drop point; where the only route in is a crane lift, that is agreed in writing before delivery. The fabrication carries 12 months on workmanship and the one-trip shell 12 months against structural defects and water ingress. Separately from both, you have 14 days to cancel under the Consumer Contracts Regulations 2013 and 30 days to reject faulty goods under the Consumer Rights Act 2015.

Other configurations

Where a forklift has to reach every deck position head-on, the 20ft open side bunded mesh floor store puts full-length side doors on the same specification. Smaller quantities are covered by the 10ft open mesh floor bunded store, which uses the identical deck over half the footprint, while a solid raised floor instead of mesh means the 20ft raised bunded store. The wider storage container range is worth a look, or contact us for a quote.

Reviews

There are no reviews yet.

Be the first to review “20Ft X 8Ft Open Mesh Floor Bunded Store”

Your email address will not be published. Required fields are marked *